Siemens Simatic IPC527G User Manual

Technical specifications
7.4 Technical data
SIMATIC IPC527G
66 Operating Instructions, 03/2019, A5E45491226-AA
7.4.3
Power demand of the components
Maximum power consumption of the auxiliary components
Component
Voltage
+12 V
+5 V
+3.3 V1
-12 V
5 V Aux
Motherboard with processor and heat
sink
5.7 A 5.6 A 0.8 A 0.1 A 0.3 A
System fan
0.5 A
N.A
N.A
N.A
N.A
Basic system
1
6.2 A 5.6 A 1.0 A 0.1 A 0.5 A
Expansions
Hard disk drive SATA
1
N.A
1.2 A
N.A
N.A
N.A
M.2
N.A
N.A
1.4 A
N.A
N.A
Single lines of current (max. permit-
ted)
2
25 A 15 A 15 A 0.3 A 2 A
Total power consumption, permitted
165 W
Efficiency of the power supply
1
AC power supply:
approx. 85% (230 V AC/120 V AC) with typical load (50%)
and 82% (230 V AC/120 V AC) with full (100%) or light load
(20%)
1
Depends on the selected device configuration.
2
The max. permitted accumulated power of the +5 V and + 3.3 V is 91 W.
7.4.4
Basic power supply
Voltage
Max. current
Voltage stability
+12 V
25A
± 5 %
-12 V
0.3A
± 10 %
+5 V
15A
± 5 %
+3.3 V
15A
± 5 %
+5 VSB
2A
± 5 %
Note
•
Total output power of +5 V and +3.3 V should be less than 91Watts.
•
DC output power should be less than 350Watts.
•
When AC input below 115 V, DC output power should derate 20% load at 50 ℃.

Siemens Simatic IPC527G Specifications

General

Brand	Siemens
Model	Simatic IPC527G
Category	Industrial PC
Language	English