Siemens SIMATIC IPC677D User Manual

Technical information
8.2 Directives and declarations
SIMATIC IPC677D
112 Operating Instructions, 09/2014, A5E32995420-AC
AUSTRALIA / NEW ZEALAND
This product meets the requirements of EN 61000-6-4:2007 Generic standards - Emission
standard for industrial environments.
This product meets the requirements of the standard EN 61000-6-4:2007 Generic standards
– Emission standard for industrial environments.
KOREA
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
8.2
Directives and declarations
8.2.1
CE marking
The device meets the guidelines listed in the following sections.
EC Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
Panel PC certificates
(http://support.automation.siemens.com/WW/view/en/10805572/134200).
Electromagnetic compatibility
This product meets the requirements of EC Directive 2004/108/EC "Electromagnetic
Compatibility".
The device is designed for the following areas of application corresponding to the CE
marking:
Scope of application
Requirements for
Interference emission
Immunity to interference
Industrial area
EN 61000-6-4:2007
EN 61000-6-2:2005
The devices comply with the standards EN 61000-3-2:2006 +A1:2009 +A2:2009 (harmonic
currents) and EN 61000-3-3:2008 (voltage fluctuations and flicker).
Low-voltage directive
The device with AC power supply complies with the requirements of the EC Directive
2006/95/EC "Low Voltage Directive". Compliance with this standard has been verified
according to EN 60950-1:2006 + A11:2009 +A1:2010 +A12:2011.

Siemens SIMATIC IPC677D Specifications

General

Brand	Siemens
Model	SIMATIC IPC677D
Category	Industrial PC
Language	English