Siemens SIMATIC IPC677D User Manual

Technical information
8.4 Technical specifications
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
127
8.4.4
AC voltage supply
Technical data
Degree of protection
IP20 (in installed state)
Protection class
VDE 0106
Note
The power supply contains an active PFC (Power Factor Correction) circuit to conform to the
EMC guidelines.
Uninterruptible AC power systems (UPS) must supply a sinusoidal output voltage in the
normal and buffered mode when u
sed with SIMATIC PCs with an active PFC.
UPS characteristics are described and classified in the standards EN 50091
-3 and IEC
62040
-3. Devices with sinusoidal output voltage in the normal and buffered mode are
identified with the classification "VFI
-SS-...." or "VI-SS-....".
Power supply characteristics
AC power supply
Input data
Voltage Nominal 100 - 240 V AC (-15% / +10%), wide
range
Continuous current
Max. 1.7 A
Starting current (load-independent)
to 50 A for 1 ms
Active power
176 W
Apparent power
190 VA
Output data
Voltages
+12 V / 12.5 A
Secondary power output
Max. 150 W
Power Good signal of the AC power supply

Siemens SIMATIC IPC677D Specifications

General

Brand	Siemens
Model	SIMATIC IPC677D
Category	Industrial PC
Language	English