Siemens SIMATIC IPC677D User Manual

Maintaining and servicing your device
7.7 Removing and installing hardware
SIMATIC IPC677D
96 Operating Instructions, 09/2014, A5E32995420-AC
7.7.5
Removing and installing the bus board
Requirement
● The device is opened.
Procedure
Removal
1. Remove all modules from the slots.
2. Remove the drive bay module for hard disks.
3. Remove the power supply.
4. Remove the screws
① on the bus board.
5. Pull the bus board from the motherboard.
Installation
Proceed in reverse order.

Siemens SIMATIC IPC677D Specifications

General

Brand	Siemens
Model	SIMATIC IPC677D
Category	Industrial PC
Language	English