Technical information
8.7 Active Management Technology (AMT)
SIMATIC IPC677D
164 Operating Instructions, 09/2014, A5E32995420-AC
Operating system not found Possible causes:
• No operating system installed
• Incorrect active boot partition
• Wrong boot drive settings in SETUP
Keyboard controller error Controller error.
Contact your technical support team.
SMART failure detected on HDD Hard disk reports pending failure through
CMOS battery is not connected.
Real-time clock has lost power
The CMOS clock was operated without battery or
with a battery that was too weak, during battery
change, for example. Check the CMOS clock.
PLD configuration failed Programming of the PLC on the motherboard
Active Management Technology (AMT)
8.7.1
Intel® Active Management Technology (Intel® AMT) is an Intel technology for the remote
maintenance of SIMATIC Industrial PCs (IPCs) with AMT technology using a management
PC. It is not necessary to install an operating system on the SIMATIC IPC with Intel® AM.
Intel® AMT provides numerous functions, e.g.:
●
Keyboard Video Mouse (KVM) Redirection
KVM connections are always possible using the KVM server that is integrated in the
firmware. KVM enables access to IPCs with a corrupted or no operating system as the
KVM server is integrated in the AMT hardware. KVM enables you to reboot a remote
computer and make changes to its BIOS settings.
●
SIMATIC IPC with Intel ® AMT can be switched on and off or restarted using another PC.
●
An image on the management PC can be integrated and used on the SIMATIC IPC with
Intel® AMT both as a CD/DVD drive and as a floppy drive. If the image is bootable, you
can also boot the SIMATIC IPC with Intel® AMT from it.
The following figure shows remote maintenance of SIMATIC IPCs with Intel® AMT, e.g.
for troubleshooting a corrupt operating system or incorrect BIOS settings: