Description of the motors
2.2 Intended use
S-1FT7 synchronous motors
Configuration Manual, 09/2018, A5E45099423B AA
23
Motors not used for the intended purpose
If you do not use the motors correctly, there is a risk of death, severe injury and/or material
damage.
• Only use the motors for their intended purpose.
• Make sure that the conditions at the location of use comply with all the rating plate data.
• Make sure that the conditions at the location of use comply with the conditions specified
in this documentation. When necessary, take into account deviations regarding
approvals or country-specific regulations.
Malfunctions of active active implants due to magnetic and electrical fields
Electric motors endanger people with active implants, for example heart pacemakers, who
come close to the motors.
• If you are affected, stay a minimum distance of 300 mm from the motors (tripping
threshold for static magnetic fields of 0.5 mT according to Directive 2013/35/EU).
If you wish to use special versions and design variants whose specifications vary from the
motors described in this document, then contact your local Siemens office.
If you have any questions regarding the intended usage, please contact your local Siemens
office.
The 1FT7 motor is intended for industrial or commercial plants.
The motor is designed for operation in sheltered areas under normal climatic conditions,
such as those found on shop floors.
The motor is only approved for operation through a converter.
More detailed information is provided in Chapter "Environmental conditions (Page 30)".
Any other application of the motor is considered to be incorrect usage.
Compliance with all of the specifications in the Operating Instructions is part of correct
usage.
Observe the data on the rating plate (type plate).
● High-performance machine tools
● Machines with high requirements in terms of dynamic response and precision
To Next Page
Loading...
Need help?
General