Disposal
11.4 Preparing for disassembly
1LA5/6/7/9, 1LG4/6, 1MA6/7, 1MB..1/2/3/4/5 - SH 63 ... 355
160 Operating Instructions, 06/2018, A5E44455710A
Preparing for disassembly
Disassembly of the machine must be carried out and/or supervised by qualified personnel
with appropriate expert knowledge.
1. Contact a certified waste disposal organization in your vicinity. Clarify what is expected in
terms of the quality of dismantling the machine and provision of the components.
2. Follow the five safety rules (Page 12).
3. Disconnect all electrical connections and remove all cables.
4. Remove all liquids such as oil and cooling liquids. Collect the liquids separately and
dispose of them in a professional manner.
5. Detach the machine fixings.
6. Transport the machine to a suitable location for disassembly.
Corrective maintenance (Page 124)
Dismantle the machine using the general procedures commonly used in mechanical
engineering.
The machine is made up of heavy parts. These parts are liable to fall during dismantling.
This can result in death, serious injury or material damage.
• Before you release any machine parts, secure them so that they cannot fall.
Disposal of components
Components
The machines consist mainly of steel and various proportions of copper and aluminum.
Metals are generally considered to be unlimitedly recyclable.
Sort the components for recycling according to whether they are:
● Iron and steel
● Aluminum
To Next Page
Loading...
Need help?
General