Description
3.3 Installation
1LA5/6/7/9, 1LG4/6, 1MA6/7, 1MB..1/2/3/4/5 - SH 63 ... 355
Operating Instructions, 06/2018, A5E44455710A
23
Table 3- 1 Applicable general regulations
Dimensioning and operating behavior EN / IEC 60034-1 GOST R
Procedure for determining the losses and the efficiency
of rotating electrical machines and inspections
EN / IEC 60034-2-1
EN / IEC 60034-2-2
EN / IEC 60034-2-3
GOST R
IEC 60034-2-1
GOST R
IEC 60034-2-2
GOST RIEC 60034-
Degree of protection EN / IEC 60034-5 GOST R
Cooling EN / IEC 60034-6 GOST R
Type of construction EN / IEC 60034-7 GOST R
Terminal designations and direction of rotation EN / IEC 60034-8 GOST R
Noise emission EN / IEC 60034-9 GOST R
Starting characteristics of rotating electrical machines EN / IEC 60034-12 GOST R
Vibration severity grades EN / IEC 60034-14 GOST R
Efficiency classification of three-phase squirrel-cage
EN / IEC 60034-30-1 GOST R IEC
IEC standard voltages IEC 60038 GOST R IEC 60038
Table 3- 2 Regulations applied for explosion-protected machines
Electrical equipment for hazardous gas atmospheres,
Part 0: General requirements
EN / IEC 60079-0 GOST 30852 0 -
Electrical equipment for hazardous gas atmospheres –
Part 1: Device protection provided by flameproof en-
EN / IEC 60079-1 GOST 30852 1 -
2002
Electrical equipment for hazardous gas atmospheres,
Part 7: Increased safety "e"
EN / IEC 60079-7 GOST 30852 8 -
Electrical equipment for hazardous gas atmospheres,
Part 14: Electric installations for endangered atmos-
pheres (except underground excavation)
EN / IEC 60079-14 GOST 30852 13 -
2002
Electrical equipment for hazardous gas atmospheres,
Part 15: Type of protection "n"
EN / IEC 60079-15 GOST 30852 14 -
To Next Page
Loading...
Need help?
General