Siemens SINAMICS SL150 User Manual

4.3 Inspections when receiving the delivery
4.3.1 Checking shock and tilt indicators
The purpose of shock and tilt indicators
The unit is equipped with shock and tilt indicators to monitor for damage during transit. It is
essential that you check the shock and tilt indicators before commissioning the unit.
WARNING
Tripped shock and tilt indicators
Safe operation of the device is not guaranteed if the shock or tilt indicator has tripped
(responded)
This can result in death, serious injury or material damage.
● If one of the indicators has tripped, do not perform any commissioning.
● Inform the Technical Support. Only specialist Siemens technicians can recommend
appropriate measures.
See also
Service & Support (Page 107)
Preparations for use
4.3 Inspections when receiving the delivery
SINAMICS SL150 6SL38600UL432AA0Z
Operating Instructions Rev.201910281433 EXAMPLE 41

Siemens SINAMICS SL150 Specifications

General

Brand	Siemens
Model	SINAMICS SL150
Category	DC Drives
Language	English