Siemens SINAMICS SL150 User Manual

Commissioning
7
When carrying out any work, carefully observe the information provided in Chapter "Safety
instructions (Page 13)".
NOTICE
Material damage caused by transport indicators remaining in the device during operation
In operation, as a result of high temperatures, the transport indicators can become detached
and fall into the device. This can result in material damage.
● Remove the transport indicators before commissioning. Remove any adhesive residue
from the transport indicators using methylated spirits.
Detailed information on commissioning and operating the device is provided in the
Commissioning Manual that addresses commissioning engineers.
WARNING
Incorrect commissioning
Malfunctions can occur as a result of incorrect commissioning and parameterization. This can
result in premature failure and subsequent damage to the drive system. This can result in
death, serious injury or material damage. Incorrectly performed commissioning can result in
the warranty becoming null and void.
It is not permissible to commission the device if it is dirty. Immediately contact Customer
Support. You can find the relevant contact person under "Service & Support".
This device may only be commissioned by electrically skilled persons who have been
adequately trained on this product, and have experience with commissioning this product and
the associated plant and system components. The electrical technician commissioning the
equipment must be trained on the specific product as a result of the differences between the
individual products, e.g. regarding topology and closed-loop control.
Obtain information about the range of SITRAIN training courses available through your local
contact person. Make use of the support and services offered by the responsible Siemens
Service Center when commissioning this equipment. You can find the relevant contact person
under "Service & Support".
SINAMICS SL150 6SL38600UL432AA0Z
Operating Instructions Rev.201910281433 EXAMPLE 69

Siemens SINAMICS SL150 Specifications

General

Brand	Siemens
Model	SINAMICS SL150
Category	DC Drives
Language	English

Summary

Safety Information and Precautions

Device Warning Symbols

Qualified Personnel

Specifies requirements for personnel operating the equipment based on training and experience.

The 5 Safety Rules

Lists essential safety rules to be followed when working with electrical equipment to ensure safety.

Residual Risks

Product Description and Features

Safety Concept

Power Unit

Overview of the power unit, its features, components, and operating principles.

Preparing the Device for Use

Mounting and Installation Requirements

Specifies environmental and site conditions necessary for proper mounting and installation of the device.

Delivery Inspection Procedures

Transportation

Device Mounting and Installation

Installation Safety Instructions

Tools Required

Torques

Electrical Connection Procedures

Electrical Connection Safety

Critical safety instructions for performing electrical connections to prevent hazards.

Electromagnetic Compatibility (EMC) Guidelines

Connecting the Power Unit

Detailed procedures for connecting power cables and signal cables to the power unit.

Device Commissioning Process

Incorrect Commissioning Warning

Highlights risks of malfunctions, damage, and warranty voidance due to incorrect commissioning.

Device Operation Guidelines

Operation Safety Instructions

Essential safety precautions that must be followed during the operation of the device.

Fault and System Message Handling

Device Maintenance Procedures

Maintenance Safety Instructions

Safety guidelines and warnings to be observed during all maintenance activities.

Preventive Maintenance Schedule

Replacing a Fan

Repairs