Functions inhibited by know-how protection
Active know-how protection inhibits the following functions:
● Drive unit settings download with STARTER
● Automatic controller optimization
● Stationary or rotating measurement of the motor data identification
● Deletion of alarm history and fault history
● Generating acceptance documentation for the safety functions
Functions that can be executed while know-how protection is active
The following functions can be executed while know-how protection is active:
● Restoring the factory settings
● Acknowledging faults
● Displaying faults, alarms, fault history, and alarm history
● Readout of diagnostic buffer
● Controlling the drive unit via the control panel in STARTER
● Displaying the generated acceptance documentation for the safety functions
Optional functions:
The functions listed below can be executed despite activated know-how protection, provided
diagnostic functions were permitted when it was activated:
● Trace function
● Function generator
● Measuring function
Functions with restricted executability:
The following listed functions can only be partly executed when know-how protection is active:
● Displaying the topology (actual topology only)
● Uploading adjustable parameters that can be changed or read when know-how protection
is active. You can find more information in chapter "Maintain list of exceptions".
See also
Configuring know-how protection (Page 37)
5.2.2.3 Configuring know-how protection
Before activating the know-how protection, enter the parameters in this exception list that are
permitted to remain readable and writable for the end user despite the know-how protection.
The exception list can only be created via the expert list. The exception list has no influence
on the input screen forms in STARTER.
Security measures for SINAMICS
5.2 Write protection and know-how protection
Industrial Security
Configuration Manual, 08/2017, A5E36912609A 37
To Next Page
Loading...
Need help?
General