A6T/A6/A5 Portable Ultrasonic Diagnostic System
4701-0040-01A
3-23
The setting items of LCD Setting are described below:
Brightness Press the【Trackball】+【SET】key to select
brightness slider position.
Default To export the factory default LCD Setting.
3.4.5 BodyMark
Press the【BodyMark】key to active the BodyMark page.
Select the desired bodymark and exit BodyMark page;
Click Exit, or press the【BodyMark】 key again to exit BodyMark screen.
The BodyMark page is shown below:
The operation of BodyMark is follows:
Add
Go to BodyMark page, click a bodymark, and the
selected bodymark appears at the left-bottom of the
image area; Move the 【Trackball】to adjust the probe
position in the bodymark; Rotate the【MENU】key to
adjust the probe orientation in the bodymark; Press the
【SET】key to fix the probe orientation. Note: To insert a
new bodymark will clear the original bodymark.
To Next Page
Loading...
Need help?
General
