A6T/A6/A5 Portable Ultrasonic Diagnostic System
4701-0040-01A
1-1
1 System Safety
1.1 Safety Overview
Safety measures for the operator and the patient are discussed in this section.
To ensure the safety of the operator and patient, please read the relevant
details in this chapter carefully before operating this system. Meanwhile, in
this manual the description on warning means that any violation of the
relevant rules may result in personal injury or even risk of life to the operator
or the patient.
The following precautions should be adhered to:
1. This system complies with Type B general equipment, Class I,
EN606601-1:1990+A1:1993+A2:1995 standard. Please follow
Section 1. “System Safety” in the user’s manual to operate this
system properly.
2. Do not modify this system in any way. Necessary modifications
can be made only by the manufacturer or its designated agents.
3. This system is fully adjusted before delivery from the factory. Do
not adjust any fixed adjustable parts.
4. If any disorder occurs during operation, please turn off the power
supply immediately and inform our designated contact persons or
us.
5. The power cable of the system should be connected to a
grounded power socket, and the ground cable should not be
removed.
6. Only the devices comply with
EN606601-1:1990+A1:1993+A2:1995 standard can be
connected with the system, either electronically or mechanically.
It is required to recheck the leakage current and other safety
performance indexes of the whole system to avoid any potential
hazard to the system resulted from leakage current
superposition.
To Next Page
Loading...
Need help?
General
