Sony DSR-250P User Manual

Editing
109
Switching the time value
Switch the DISPLAY SELECT switch as follows:
TC: Displays the time code. This is indicated as “00:00:00:00” or “00:00.00:00”.
U-BIT: Displays user bits. This is indicated as “00 00 00 00”.
Note
The time code and user bits cannot be displayed properly if the tape does not have time
code and/or user bits recordings or if the time code was recorded using a non-
compatible method.
Setting time values
DISPLAY SELECT
Time code/user bits

Sony DSR-250P Specifications

General

Brand	Sony
Model	DSR-250P
Category	Camcorder
Language	English