138
Recording an image from a tape as a still image
Titles that are already recorded on tapes
You cannot record the titles on a “Memory Stick.”
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Recording a still image from other equipment
(1) Set the MEMORY/CAMERA/VTR selector to VTR and set DISPLAY in to
LCD in the menu settings.
(2) Play back the recorded tape, or turn the monitor on to see the desired program.
The picture from the other equipment appears on the LCD screen or in the
viewfinder.
(3) Follow steps 3 and 4 on page 137.
When recording an image through the VIDEO IN/OUT jack
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
TV.
Connect using an S video cable (not supplied) to obtain high-quality pictures
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the VCR/TV.
This connection produces higher quality DVCAM/DV format pictures.
VIDEO
OUT
S VIDEO
S VIDEO
VIDEO IN/OUT
: Signal flow
(not supplied)
(not supplied)
To Next Page
Loading...
Need help?
General
