31
Playback
– Basics
Playing back a tape
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the LCD
screen facing out.
To select the audio output channel via the speaker or PHONES jack
Select the channels using the AUDIO MONITOR selector.
CH-1: Channel 1 audio
MIX: Mixed audio (channels 1 and 2)
CH-2: Channel 2 audio
To control the display of the screen indicators
(1) Set the DISPLAY switch located on the front of the viewfinder to ON. If the
switch is not set to ON, the DISPLAY button does not function.
(2) Press DISPLAY on the camcorder or on the Remote Commander supplied with
your camcorder.
The indicators appear on the LCD screen or in the viewfinder.
To make the indicators disappear, press DISPLAY again.
DISPLAY
ON
OFF
DATA CODE
DISPLAY
DATA CODE
DISPLAY
DISPLAY
switch
To Next Page
Loading...
Need help?
General
