36
— Advanced Recording Operations —
Shooting with manual adjustment
Under normal conditions, this unit automatically makes various adjustments as it
shoots. However, you can adjust the following functions manually to suit your
preference.
Functions you can adjust by setting the AUTO MODE switch to OFF
Iris, gain, shutter speed, and white balance
Functions you can adjust in menu settings
Deactivating the SteadyShot
Functions you can adjust by using other selectors/rings
ND filter, zebra pattern, focus, AE shift, and zoom
The following describes how to adjust all the functions mentioned above except ND
filter (p. 17), zoom (p. 24), focus (p. 45), and white balance (p. 47) .
AUTO MODE switch
ON [a]
Select this position to let the unit adjust the iris, gain,
shutter speed, and white balance automatically.
OFF [b]
Select this position to adjust the iris, gain, shutter speed,
or white balance manually.
Notes
•The functions (iris, gain, or shutter speed) that are not adjusted manually will be
automatically adjusted even if the AUTO MODE switch is set to OFF.
•When you manually adjust two or more functions from the following during backlight
or spot light mode: iris, gain, and shutter speed, the backlight or spot light function
will be automatically canceled.
To Next Page
Loading...
Need help?
General
