Sony Handycam DCR-PC3 User Manual

105
“Memory Stick” operations
Preventing accidental erasure
– Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY while pressing the small green button.
Make sure that the LOCK is set to the right (unlock) position.
(2) Press INDEX on your camcorder or the Remote Commander to display the
index.
(3) Press “- MARK.” The screen to protect the image appears.
(4) Press the image you want to protect. The “-” appears on the protected
image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 4. The “-” disappears.
Note
Formatting erases all information on the “Memory Stick”, including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
2
INDEX
3,4
123
456
EXIT RET
- MARK
1 / 40
123
456
EXITDEL MARK - MARK
T t
-
2 / 40
Tt
- MARK
1
L
O
C
K
POWER
VTR
MEMORY
CAMERA
OFF
L
O
C
K

Sony Handycam DCR-PC3 Specifications

General

Brand	Sony
Model	Handycam DCR-PC3
Category	Camcorder
Language	English