109
“Memory Stick” operations
Writing a print mark – PRINT MARK
You can specify the recorded still image to print out. This function is useful for printing
out still images later.
Your camcorder conforms with the DPOF (Digital Print Order Format) standard for
specifying the still images to print out.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY while pressing the small green button.
Make sure that the LOCK is set to the right (unlock) position.
(2) Press INDEX on your camcorder or the Remote Commander to display the
index.
(3) Press
MARK. The screen to write a print mark appears.
(4) Press the image you want to write a print mark. The
appears on the
selected image.
To return to FN
Press EXIT.
To cancel writing print marks
Press the image you want to cancel the print mark. The on the selected image
dissapears.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot write print marks on still images.
2
INDEX
3,4
123
456
EXIT
MARK
123
456
EXITDEL
MARK
-
MARK
MARK
1 / 40
Tt
2 / 40
Tt
RET
1
L
O
C
K
POWER
VTR
MEMORY
CAMERA
OFF
L
O
C
K
To Next Page
Loading...
Need help?
General