32
AUDIO/VIDEO
S VIDEO
LINE IN
VIDEO S VIDEO
To use the photo recording function using the Remote Commander
Press PHOTO on the Remote Commander. Your camcorder records a picture on the
LCD screen or in the viewfinder immediately.
To use the photo recording function during normal CAMERA recording
Press PHOTO deeper. The still picture is then recorded for about seven seconds and
your camcorder returns to the standby mode. You cannot select another still picture.
If you record a moving subject with photo recording function
When you play back the still picture on other equipment, the picture may fluctuate.
When shooting in the dark
Attach the video flash (not supplied) to the accessory shoe.
Printing the still picture
You can print a still picture by using the video printer (not supplied). Connect the video
printer using the A/V connecting cable supplied with your camcorder.
Connect it to the AUDIO/VIDEO jack and connect the yellow plug of the cable to the
video input of the video printer. Refer to the operating instructions of the video printer
as well.
If the video printer is equipped with S video input
Use the S video connecting cable (not supplied). Connect it to the S VIDEO jack and the
S video input of the video printer.
Photo recording
: Signal flow
Video printer
To Next Page
Loading...
Need help?
General