110
— Additional Information —
Using the viewfinder
You can operate with the touch panel using the viewfinder.
(1) Pull out the viewfinder until it clicks, and then turn the LCD panel over and
move it back to your camcorder body with the LCD screen facing out (p. 19).
The same display as the LCD screen appears in the viewfinder. The LCD
screen is turned off.
(2) Press the LCD screen. The
appears in the viewfinder.
(3) Move
by pressing the LCD screen to select a desired item.
Notes
•Do not touch the LCD screen with wet hands.
•Do not press them with sharp objects such as pens.
After a while
The disappears. Press the LCD screen to display again.
When you press the two points on the LCD screen simultaneously
The does not move.
When you keep pressing the left/right edge of the LCD screen
The moves to one button to another continuously. Release your finger to make
stop.
2
3
x m N X M
FN
In the viewfinder
The moves to the left
The moves to the right
To execute the selected item
To Next Page
Loading...
Need help?
General