Using the Menu
Using the Menu
63
REC LAMP
FORMAT LAMP
b Note
• The format lamp lights up according to the format of the playback or of an input signal from
another device when [VCR HDV/DV] on the (IN/OUT REC) menu is set to [AUTO].
IRIS DIAL
You can select the rotation direction of the iris dial to open or close the iris.
DATA CODE
Select the item to be displayed when you press DATA CODE (p. 44).
LETTER SIZE
GON Select to turn on the camera recording lamps on the front and rear of
your camcorder during recording.
OFF Select this setting in the following recording situations. The camera
recording lamps on the front and rear will not light up during
recording.
• When you do not want the subject to be nervous about being
recorded.
• When you are recording close to the subject.
• When the subject reflects the light of the recording lamp.
GON Select to turn on the format lamp. The lamp of the format that is
selected in [REC FORMAT] lights up when the POWER switch is set
to CAMERA. The lamp of the format that is selected in [VCR HDV/
DV] lights up when the POWER switch is set to VCR.
OFF Select when you do not want to turn on the format lamp. The i.LINK
lamp also does not light up.
GNORMAL Select to rotate clockwise when looked at from the lens side to close
the iris and decrease the light volume.
OPPOSITE Select to rotate counter clockwise when looked at from the lens side
to close the iris and decrease the light volume.
GDATE/CAM Select to display the date and time, or the camera settings data during
playback.
DATE Select to display the date and time during playback.
GNORMAL Select to display the menu screen at normal size.
2x Select to display the selected menu item at double the normal height.
,continued
To Next Page
Loading...
Need help?
Imaging
Audio
Power
Weight and Dimensions
