Name: Sony Handycam NEX-VG10
Brand: Sony
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Preparing the battery

Charging the battery pack

Charge the battery pack using the supplied battery

charger. You cannot charge the battery pack

attached on the camcorder.

1 Insert the battery pack into the battery charger.

2 Connect the battery charger to the wall outlet

(wall socket).

The CHARGE lamp lights up.

Lit: The battery is being charged.

Off: Normal charge is completed.

An hour after off: Full charge is completed.

For the USA and Canada

For other countries/regions

Charging time

The following table shows the charging time in

minute required to charge a fully depleted battery

pack at a temperature of 25 °C (77 °F). The

charging time varies depending on the operating

conditions. See page 40 on the recording time

available.

• We recommend charging the battery pack in an ambient

temperature of between 10 °C and 30 °C (50 °F and 86 °F).

You may not be able to efficiently charge the battery pack

outside of this temperature range.

Plug

CHARGE lamp

to the wall outlet

(wall socket)

Battery pack Full charge Normal charge

NP-FV70

(supplied)

550 490

NP-FV100 960 900

to the wall outlet (wall

socket)

CHARGE lamp

Power cord (mains lead)

Other manuals for Sony Handycam NEX-VG10

Questions and Answers:

Need help?

Do you have a question about the Sony Handycam NEX-VG10 and is the answer not in the manual?

Optics and Lens