Name: Sony Handycam NEX-VG10
Brand: Sony
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Table of

contents

Sample

images

Menu Index

1 MENU button t [Brightness/Color] t [White Balance] t desired mode.

2 As necessary, [Option] t adjust the color tone.

Adjusting it toward + turns the image reddish and adjusting it toward – turns the image

bluish.

1 MENU button t [Brightness/Color] t [White Balance] t [C.Temp./

Filter].

2 [Option] t desired value.

1 MENU button t [Brightness/Color] t [White Balance] t [Custom

Setup].

2 Hold the camcorder so that the white area fully covers the AF area

located in the center, and then press the PHOTO button down.

The shutter clicks and the calibrated values (color temperature and color filter) are displayed.

3 To call the custom white balance setting, MENU button t [Brightness/

Color] t [White Balance] t [Custom].

• If a flash (sold separately) is used when the PHOTO button is pressed, a custom white balance is

registered with the flash light taken into account. Take pictures with flash in later still image shootings.

Preset white balance ( )

C.Temp./Filter

Color Temp. The higher the number, the more reddish the image, and the

lower the number, the more bluish the image. (The default

setting is 5500 K.)

Color Filter Based on using the set color temperature as the standard, the

color can be compensated to G (Green) or M (Magenta). The

higher the number, the more the color is compensated. (The

default setting is 0.)

Custom white balance

Note

Other manuals for Sony Handycam NEX-VG10

Questions and Answers:

Need help?

Do you have a question about the Sony Handycam NEX-VG10 and is the answer not in the manual?

Optics and Lens