Step
1:
Installing the Projector
The projector displays pictures output from
a VCR or other devices.
The projector can be used in various places
and you can enjoy viewing beautiful pictures
easily.
Unsuitable
installation
Do
not
place
the
projector
in thefollowing
situations, which may cause malfunction
or
damage
to
the
projector.
Poorly ventilated location
• Allow adequate air circulation to prevent
internal heat build-up. Do not place the
unit on surfaces (rugs, blankets, etc.)
or
near materials (curtains, draperies) that
may block the ventilation holes. When
internal heat builds up due to blockage
of
ventilation holes, the temperature sensor
will function, and the power will be turned
off
automatically.
• Leave space
of
more than 30
em
(11
7/
S
inches) around the unit.
• Be careful not to allow the ventilation
holes to inhale tiny objects such as pieces
of
paper
or
clumps
of
dust.
Hot and humid
• Avoid installing the unit in a location
where the temperature or humidity is very
high,
or
the temperature
is
very low.
• To avoid moisture condensation, do not
install the unit in a location where the
temperature may rise rapidly.
Locations subject
to
direct
cool
or
warm air
from
an air-conditioner
Installing the projector in such a location
may cause a malfunction
of
the unit due to
moisture condensation
or
rise
in
temperature.
Near a heat
or
smoke
sensor
Malfunction
of
the sensor may occur.
13
()
o
::J
::J
CD
U
o'
::J
o
I»
::J
a.
"'1J
CD
'C
I»
@
-
o'
::J
o
To Next Page
Loading...
Need help?
General