The
I/C)
(On/standby) switch flashes in
green, then lights in green.
The
projector cannot
be
used while the
I/C)
switch is flashing.
3 Turn on the equipment
connected to the projector.
Refer to the operating instructions
of
the
connected equipment.
4 Press INPUT repeatedly to
select the input you want to
project on the screen.
Each
time you press the button, you
can
select the input in the following
sequence.
Input-A
--.
HDMI
--.
Video
--.
S-Video
t 1
To
view
the
picture
from
Press
INPUT
to
display
Computer/Component Input-A
connected to the INPUT
A connector
ComputerNCR, etc.
HDMI
connected to HDMI
(digital) connector
Video equipment Video
connected to the VIDEO
INPUT connector
Video equipment S-Video
connected to the
S VIDEO INPUT
connector
mill
•
If
"Auto Input Search"
is
set to "On," the
projector searches for the signals from
the connected equipment and displays
the input channel where the input signals
are found.
(@" page 39)
• When the analog signal is input from a
computer, the Smart
APA
(Auto Pixel
Alignment) feature adjusts the picture
of
the connected equipment to its clearest.
• Depending on the type ofyour computer,
for example a notebook, or an all-in-one
LCD type, you may have to switch the
computer to output to the projector
by
pressing certain keys (e.g.,
ILcoll(§)
,
O/~
,etc.), or by
changing your computer's settings.
The
key
used for switching the computer
to output to the projector varies
depending on the type
of
computer
~
or
~
an
1 Press the
I/C)
switch.
A message
"POWER
OFF?
Please press
I/C)
switch again." appears
on
the
screen.
1m
The message disappears if you press any
button other than the
I/C)
switch, or ifyou
do not press any button for five seconds.
2 Press the
I/C)
switch again.
The
I/C)
switch flashes in green and the
fan continues to run to reduce internal
heat. Also, the
I/C)
switch flashes
quickly for the first
60
seconds. During
this time, you will not
be
able to light
up
the
I/C)
switch again with this switch.
3 Unplug the AC power cord from
the wall outletafter the fan stops
running and the IIC) switch
lights
in
red.
27
To Next Page
Loading...
Need help?
General