Cleaning the Air
Filter
The air filter should be cleaned whenever
you replace the lamp.
Remove the air filter, and then remove the
dust with a vacuum cleaner.
The
time needed to clean the air filter will
vary depending on the environment
or
how
the projector is used.
When
itbecomes difficult to remove the dust
from the filter with a vacuum cleaner,
remove the air filter and wash it.
1 Turn the power off and unplug
the power cord.
2 Draw out the air filter cover and
remove it.
Air filter
3 Remove the air filter.
4 Wash the air filter with a mild
detergent solution and dry it in a
shaded place.
S Attach the air filter so that it fits
securely into each claw on the
air filter cover and replace the
cover.
1m
•
If
you neglect to clean the
air
filter, dust
may accumulate, clogging it.
As
a result,
the
temperature
may rise inside the unit,
leading to a possible malfunction
or
fire.
• Be sure to attach the air filter cover firmly;
the power can not
be
turned on if
it
is
not
closed securely.
• The air filter has a face and a reverse side.
Place the air filter so that it fits
in
a notch on
the air filter cover.
51
Q
::T
CD
fjJ
To Next Page
Loading...
Need help?
General