49
3.6 Ethernet – No Connect – General Checking
49
TV turn ON condition:
Check if TV has MAC Address
Set-up Network setup
Invalid MAC Address
Change B Board
Yes
Check if the Ethernet
cable is good
Check if any abnormal
or broken point on
Ethernet Connector and parts
(J7000/L7000/RB7000/C7002)
OK
Yes
No
NG
Check if TV has good
cable connection
Set-up Network setup
Failed
OK
START
END
Change a good cable
Connector (J7000) and parts NG
Change B Board
T7000 or T7001 or Main IC
(IC5000) NG
Change B Board
Failed
Check TV has connection OK
Set-up Network setup
OK
Failed
To Next Page
Loading...
Need help?
General