6-32 (E) Chapter 6 Editing
6-7 DMC Editing
6-7 DMC Editing
Allows you to use slow motion and other variable speeds during playback and
editing. DMC stands for Dynamic Motion Control.
Notes
• Before executing AUTO EDIT, you must execute PREVIEW. After
PREVIEW if the edit point and channel have been corrected, PREVIEW
must be executed again.
• Playback in the shuttle mode cannot be conducted during DMC editing while
PREVIEW is in progress.
• Entry cannot be performed on the channel during AUTO EDIT.
• A peripheral device can be selected as the player, but material using
transition effects cannot be edited.
• In the Insert mode, INS (Insert) cannot be set.
• In PREVIEW, in addition to the conventional playback port (P1), the
recording port (R1) is also used as a recorder. Therefore, if the recorder is
selected during DMC editing while PREVIEW is in progress, the
RECORDER button, the P1 and R1 buttons (or the P2 and R2 buttons) light
up. Depending on the port selected in MAV-777 Expansion menu item 317
PANEL MODE RECORDER PORT, the recording device automatically
lights.
• You cannot execute PREVIEW when material is loaded to the R1 port or the
meter panel’s Remote button is lit.
• You cannot select the same port for the player and recorder.
• You cannot perform abbreviated editing or on-the-fly editing.
IN OUT
PB EE PB
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
B1 B2 B3 B4 B5 B6 B7
MODE SHIFT
IN
DMC EDIT
PREVIEW
AUTO EDIT
REVIEW
MEMORY
DELETE
OUT
TRIM
AUDIO
ENTRY
HOLD RESET TC/UB TIMER SEL
1
2
EXT
R1
R2/
P3
PORT SELECT
P1
P2
SHUTTLE
MULTI
CONTROL
PLAYER
PREROLL EDIT
REW PLAY F. FWD STOP
REC
RECORDER
JOG VAR
R
E
V
E
R
S
E
F
O
R
W
A
R
D
1 Use the normal editing procedure to set the recorder IN point and player
IN point.
For details about how to set edit points, see Section 6-2-6, “Setting the Edit
Points” (page 6-8).
2 Press the DMC EDIT button to light the button.
3 Press the VAR button to light the button.
1
2, 4
9
6
4, 7
3
To Next Page
Loading...
Need help?
General
