3-28 (E) Chapter 3 Operating Modes
3-5 Dual Play Mode
3-5-2 Items Displayed in Dual Pla y Mode
The items displayed in Dual Play mode are as follows.
Example of Dual Play mode display
Number
1
2
3
4
5
Name
Monitor display
Selected alias
information
Alias list
Cursor
t mark
Information displayed
Displays the monitor image of the port that is the subject of
operation. When an alias is loaded or set, the image at the
port that is the subject of operation is automatically
displayed. The setting displayed is the one determined by
the down-converter setting for each port.
Shows all the attributes, such as the name, number,
material name, update date, material length, and loop
settings of the alias on which the cursor is positioned in the
alias list.
When CP Setup mode item 4006 Alias Stamp Mode is set
to FG Only, the stamp screen foreground IN point is
displayed; when it is set to Both, the foreground and
background IN point stamp pictures (see the display
example below) are displayed.
This is the alias list. One line corresponds to one alias.
Use the MULTI CONTROL knob to move the cursor from
one line to another in the alias list.
Indicates aliases that are currently loaded in Dual Play
mode.
3
1
4
5
2
To Next Page
Loading...
Need help?
General
