Chapter 3 Operating Modes 3-29 (E)
3-5-3 Key Assignments in Dual Pla y Mode
In Dual Play mode, the function keys to the left and below the liquid crystal
display (L1 to L11, and B1 to B7) are assigned to the following functions.
Key
L1 – L4
B1
B2
B3
B4
B5
B6
B7
SHIFT
+B1
SHIFT
+B3
SHIFT
+B5
SHIFT
+B6
SHIFT
+B7
Function name
(caption)
(Sort keys)
Load Alias
New Alias
Modify Alias
Cue Up Top
Cue Up End
Direct Cue Up
Select Active
Unload Alias
Match Frame
Rename Alias
Delete Alias
Capture New
Stamp
Description
Sort the alias list.
Loads the alias on which the cursor is positioned.
Opens the Alias Creation dialog box to allow you to create
a new alias.
Opens the Alias Sheet dialog box of the alias on which the
cursor is positioned in the alias list to allow you to modify
its contents.
Moves to the top of the alias material that is currently
loaded.
Moves to the end of the alias material that is currently
loaded.
Displays the Time Data Input dialog box to specify the cue
up position. Cue up is performed in the current Timer
mode.
Moves the cursor to the alias currently the subject of
operation in the alias list.
Unloads the alias currently the subject of operation.
Corrects unmatched aliases. The alias not currently the
port is matched to the current port.
Allows you to change the name of the alias on which the
cursor is positioned in the alias list.
Deletes the alias on which the cursor is positioned in the
alias list.
Updates the stamp picture of the currently loaded alias.
When you press this combination of buttons, the screen
that appears on the monitor is recorded as the new stamp
picture. Perform this operation after moving the cursor
onto the currently loaded alias. The screen cannot be
recorded when None is specified in CP Setup mode item
4006: Alias Stamp Mode.
To Next Page
Loading...
Need help?
General
