Chapter 2 Name and Functions of Parts 2-5 (E)
2 RECORDER button
This button selects the port (the RECORDER port) used
as the recorder during editing. Pressing this button
automatically selects the RECORDER port according to
the settings in item 317 PANEL MODE RECORDER
PORT in the MAV-777 Expansion menu, and the
selected port and RECORDER buttons light. For
example, if the MAV-777 is set for R1P1, P1 is
specified as the RECORDER port and the panel lights as
shown in the following figure after you press the
RECORDER button.
1
2
EXT
R1
R2/
P3
PORT SELECT
P1
PLAYER
RECORDER
R3/
P2
3 PLAYER button
This button selects the port used as the player during
editing (the PLAYER port). You can switch the
PLAYER port by pressing this button simultaneously
with any of the PORT SELECT buttons. For example, if
you press this button with the P2 button, the lamps
corresponding to these buttons light as shown in the
following figure, and P2 is selected as the PLAYER
port.
1
2
EXT
R1
R2/
P3
PORT SELECT
P1
PLAYER
RECORDER
R3/
P2
To Next Page
Loading...
Need help?
General
