Chapter 3 Operating Modes 3-5 (E)
For details about how to enter time data, see Section 3-7-1, “Time Data Entry Dialog
Box” (page 3-42).
For Material Monitor settings, see Section 3-6, “CP Setup Mode” (page 3-34).
For details on BVE mode, see Section 5-4, “Basic Operations in BVE Mode” of
Volume I of this Operation Manual.
When EXT1 or EXT2 is assigned as the port currently subject of operation, the
B1 key and SHIFT+B1 keys can be used as described below.
Key
B1
SHIFT+
B1
Function name
(caption)
Standby On/
Off
Eject
Description
Switches Standby On/Off for the external HD VTR assigned
to the port currently the subject of operation.
Ejects the cassette mounted in the external HD VTR
assigned to the port currently the subject of operation.
Key
SHIFT
+B3
SHIFT
+B4
SHIFT
+ B5
SHIFT
+ B6
SHIFT
+ B7
Function name
(caption)
Cut Out
Material
Protect On/Off
Rename
Delete
Capture New
Stamp
Description
Cuts out an area from the loaded material that is currently
selected, and creates new material. VIDEO only or AUDIO
only cutouts are not possible.
Selects whether material can be deleted and whether
attributes can be changed.
Change name of the material.
Deletes material. All material not protected with the Protect
feature can be deleted with one execution (Batch Delete).
Use of Delete or Batch Delete is effective only for material
that is not assigned to any port.
Switches the stamp picture for material that is assigned to
the port that is currently the subject of operation.
* Material stamp screens can be numbered 0001 through
0999. When recording from the control panel, the material
destination screen is automatically recorded as the stamp
screen.
To Next Page
Loading...
Need help?
General
