13
STR-DE695
SECTION 3
TEST MODE
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
While depressing the [SURR BACK DECODING] and the [TUNING --]
buttons simultaneously, press the
?/1 button to turn on the
main power.
The message “FACTORY” appears for a moment and the present
contents are reset to the default values.
AM CHANNEL STEP 9 kHz/10 kHz SELECTION
MODE (US, Canadian, E model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Press the [TUNER FM/AM] button to set AM and press the ?/1
button to turn off the main power.
While depressing the [TUNING +] button or the
[PRESET TUNING +] button, press the ?/1 button to turn on the
main power.
Either the message “9k STEP” or “10k STEP” appears for a
moment and select the desired step.
SPEAKER SIZE SELECTION MODE
* Either the normal speaker or micro satellite speaker can be se-
lected.
* Procedure:
While depressing the [MAIN MENU] button, press the ?/1 but-
ton to turn on the main power.
Either the message “NORM. SP.” or “MICRO SP.” appears for a
moment and select the desired speaker size.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested.
When this test is activated, all segments light on at the same
time, then each segment lights on one after another.
* Procedure:
While depressing the [SURR BACK DECODING] and the [DISPLAY]
buttons simultaneously, press the ?/1 button to turn on the
main power.
1. ALL segments light on.
[2CH] LED light on.
2. Press the [DIMMER] button, confirm display.
[A.F.D.] and [MUSIC] LED light on.
3. Press the [VIDEO 1] button, confirm display.
[MOVIE] and [SURR BACK DECODING] LED light on.
SW
L
SL
CR
SSB SR
L F E
dB
kHz
mft.
MHz
D
D
D
D
SP SP A
SP B
OPT
SLEEP
COAX
MULTI CH IN 12 D.RANGE EQSTEREOMONORDS
DIGITAL MEMORY
EX PROLOGICII DTS-ES NEO:6 MPEG-2 AAC
L
SL
R
SR
dB
Hz
ft.
SP A
SP B
COAX
1 D.RANGE EQ MONO
MEMORY
EX
II
-ES NEO:6 -2
SW
C
SSB
L F E
k
m
MHz
D
D
D
D
SP
OPT
SLEEP
MULTI CH IN 2 STEREO RDS
DIGITAL
PROLOGIC DTS MPEG AAC
4. Press the [DIMMER] button, all segments and all LEDs light off.
5. Every pressing the [DIMMER] button turns on each segment and
LED one after another in the same order.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
* Procedure:
While depressing the [2CH] button, press the ?/1 button to turn
on the main power.
The message “SF. CLR.” appears for a moment.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
While depressing the [A.F.D.] and the [DISPLAY] buttons simul-
taneously, press the ?/1 button to turn on the main power.
The destination and the software version are displayed for a
moment.
AUTOBETICAL MODE (AEP, UK model only)
* When this mode is used, the receiver scans the broadcasts that
can be received by the tuner, and sets up the broadcasts.
Be sure to start scanning after connecting the antenna.
* Procedure:
Check that the antenna is connected.
While depressing the [MEMORY] button, press the ?/1 button
to turn on the main power.
The message “AUTO-BETICAL SELECT” appears for a mo-
ment and the receiver starts scanning.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander
can be selected.
* Procedure:
While depressing the [ENTER] button, press the ?/1 button to
turn on the main power.
Either the message “C.MODE.AV 1” or “C.MODE.AV 2” ap-
pears for a moment and select the desired mode.
Ver 1.1
To Next Page
Loading...
Need help?
General
Weight and Dimensions
