Sony TA-AX2 User Manual

TROUBLE CHECKS
The following checks will assist in the correction of most problems
which you may encounter with your unit. Should any problem per 
sist after you have made these checks, consult your nearest Sony
service facility.
Before going through the check list below, first refer back to the
connection and operating procedures.
No audio
• Check speaker and program source connections.
• Check the settings of the function switches.
• Check the SPEAKERS selector setting.
• Turn up the volume.
No audio from one channel or unbalanced left and right volume
• Adjust the BALANCE control.
• Check the speaker and input connections of the inoperative
channel.
Abrupt loss of sound from one or both of the speakers *
*This symptom may be caused when the protection circuits activate.
• Check the speaker terminals or speaker cord for a short.
• Check for a connected audio component which might generate a
de content that affects the amplifier.
• Remove any object on the top of the cabinet which might prevent
normal air circulation.
No tape recording
• Check that the function switches are correctly set.
Reversed left and right sound
• Check the speaker cord connection and speaker location.
Lack of bass sound or obscure instrument position
• Check the speaker connection for proper phasing.
Severe hum or noise
• Use shielded connecting cords.
• Keep the connecting cords away from transformers or motors at
least 3 meters from TV sets and fluorescent lights.
• Ground the amplifier.
Rustling noise
• Make secure connections.
• Wipe the plugs and jacks with a cloth lightly dampened with
methanol.
11

Sony TA-AX2 Specifications

General

Brand	Sony
Model	TA-AX2
Category	Amplifier
Language	English