Sony TA-AX2 User Manual

FEATURES
PRECAUTIONS
The Sony TA-AX2 offers slim styling with a high order of perform 
ance and easy operation.
• There are connections for two tape decks and tape duplication is
possible.
• Two pairs of speaker systems can be connected, and driven
either individually or simultaneously.
• There are treble and bass tone controls.
• There is a LOUDNESS switch for full-range listening at lower
sound levels, and a LOW FILTER switch for eliminating low-
frequency distortion caused by record warp.
OPERATING VOLTAGE
Before connecting the unit to the power source, check that the
operating voltage of your unit is the same as the local power line
voltage.
The European countries model (type 1) operates on 220 V ac.
The United Kingdom model (type 2) operates on 240 V ac.
The model for other countries (type 3) operates on either 120, 220,
or 240 V ac. The voltage selector is located on the rear panel.
If the selector must be reset, disconnect the ac power cord and
turn the selector with a coin so that the arrow mark of the
selector points to the proper voltage figure.
On safety
• Check that the operating voltage of your unit is identical with the
voltage of your local power supply.
• Should any liquid or solid object fall into the cabinet, unplug the
unit and have it checked by qualified personnel before operating it
any further.
• Unplug the unit from the wall outlet if it is not to be used for an
extended period of time. To disconnect the cord, pull it out by
grasping the plug. Never pull the cord itself.
On installation
• Do not install the unit in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, ex 
cessive dust, mechanical vibration or shock.
• Good air circulation is essential to prevent internal heat build-up
in the unit. Place the unit in the location with adequate air circula 
tion. Do not place the unit on a soft surface, such as a rug that
would block the ventilation holes on the bottom.
• Do not place anything on top of the cabinet. The top ventilation
holes must be unobstructed for the proper operation of the unit and
to prolong the life of its components.
On operation
• Before making program source connections, be sure to turn the
power switch off and unplug the unit.
• Do not attempt to test the protection circuits by blocking the ven 
tilation holes or connecting improper loads.
• When the unit is not used, turn the power off, to conserve energy
and to extend the useful life of your unit.
On cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent such as alcohol or ben 
zine.
On repacking
Do not throw away the carton and the packing material. It makes
an ideal container to transport the unit in. When shipping the unit
for repair work or to another location, repack it as illustrated on the
carton box.
3

Sony TA-AX2 Specifications

General

Brand	Sony
Model	TA-AX2
Category	Amplifier
Language	English