2-2. Cleaning
2-2-1. Cleaning the Fans
CAUTION
Before cleaning the fans, be sure to turn off the all power switches and disconnect the all power cables.
Cleaning the fans with power turned on may result in electric shock or damage to boards.
Note
This unit is cooled with the fans on the right side.
If dust accumulates on the air vents of the fans and air flow is blocked, internal temperature of the unit increases, which
may affect the performance and life of the unit.
It is recommended that the fans be cleaned monthly.
Normal state
1. Remove dust on the fan and surrounding parts with a vacuum cleaner or the like.
When heavy dust cannot be removed
1. Remove the relevant fan following the fan replacement method (Refer to “4-4. DC Fan”.)
2. Clean the frame and blades of the fan with a cleaning cloth moistened with cleaning fluid.
• Cleaning cloth (Sony part No.: 3-184-527-01)
• Cleaning fluid (Sony part No.: 9-919-573-01)
This figure shows XVS-8000.
Fans
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
2-4
To Next Page
Loading...
Need help?
General
