4-2. Front Panel
4-2-1. XVS-9000
Procedure
1. Loosen the six screws (with drop-safe), then remove the front panel in the direction of the arrow.
Front panel
Front panel
Screws
(with drop-safe)
Two hooks
Precautions during assembly
Note
• When attaching the front panel, do not use the electric screwdriver. It may damage the screws.
• When attaching the front panel, hook it on the two hooks of the top panel first, then attach the lower side.
2. Install the removed parts by reversing the steps of removal.
XVS-9000-C/XVS-8000-C/XVS-7000-C/XVS-6000-C
4-2
To Next Page
Loading...
Need help?
General
