4–2 SEAT AND RESTRAINT
FRONT SEAT BACK RECLINING
ADJUSTMENT (MANUAL SEAT)
To change the seat back angle, lean for-
ward slightly and raise the lever. Then lean
back to the desired angle and release the
lever. After adjusting, make sure the lever
is returned to its original position; otherwise,
the seat back could unlatch while the ve-
hicle is in motion, causing the drive to lose
control of the vehicle.
FRONT SEAT SLIDE ADJUSTMENT
(MANUAL SEAT)
To move the seat forward or backward, pull
and hold the seat slide lever up and move
the seat as required. Then, release the le-
ver in desired position.
WARNING
Control of vehicle can be lost.
Do not adjust seat back when vehicle
is moving.
WARNING
Occupants can slide under seat belts.
•
Do not recline seat back too much.
•
To get maximum protection, adjust
seat back as upright as you can.
New Rexton04_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:31Page 2 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
