8–32 SERVICE AND MAINTENANCE
HOW TO CHANGE A FLAT TYRE
If a tyre goes flat, follow these safety in-
structions before you change the tyre:
Tyre Change Safety Precautions
1. Turn on hazard flashers.
2. Move off the road to a safe place away
from traffic.
3. Park on a firm and level surface.
4. Turn off engine and remove key.
5. Set parking brake.
6. If vehicle has an automatic transmission,
shift to P. If your vehicle has a manual
transmission, shift to first or reverse.
7. Have all passengers get out of vehicle
and stand in safe a place.
REMOVING THE SPARE WHEEL
1. Insert the spare wheel handle into the
hole above the rear bumper.
2. Then attach the wheel nut wrench into
the spare wheel handle.
3. Rotate the wheel nut wrench counter-
clockwise until the winch wire is
loosened.
4. Slide the lift plate through the center of
the spare wheel, then place the spare
wheel near the flat tyre.
New Rexton08_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:38Page 32 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
