3–26 INSTRUMENTS AND CONTROLS
Coming out order of the road signs
• If the vehicle stops, the currently turned
off area of the signs will remain as it is.
• If the vehicle drives off again, the next
area from the turned off signs will start
to flash.
To turn the lights on or off, twist the knob
on the end of the combination switch lever.
OFF position
All lights are off.
Position
Position, tail, license plate, fog and instru-
ment panel lights are illuminated.
Position
Headlight (low beam) and all the above lights
are illuminated.
AUTO Position (optional)
Turn on and off all lights automatically.
LIGHT SWITCH
CAUTION
•
Fog lamps will turn on according
to lights switch positions when the
fog lamps switch is ON.
•
Do not lay anything on the auto
light sensor located in passenger
side instrument panel. AUTO light
may operate incorrectly, if covered.
New Rexton03_EN_RHD_일반지역.P65 2004-05-21, ¿ÀÀü 10:30Page 26 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
