Edition Manual Chapter Page
2014-09-22 Workshop Manual, GGP Park 1 General instructions 31
1.6.2 General tightening torque
Unless otherwise stated, the following
tightening torque are applicable for screws and
nuts on the machine:
1.7 Instructions for use
Some procedures, e.g. changing engine oil,
engine filter etc., are refered to the owner´s
manual, delivered with the actual machine.
The owner´s manual can also be downloaded
from GGP´s homepage. Go to www.GGP.com
and click further to your actual language and
heading.
Tightening torques
Thread Torque
M5 5,7 Nm
M6 9,8 Nm
M8 24 Nm
M10 47 Nm
To Next Page
Loading...
Need help?
General
