Stiga TC 102 Series Workshop Manual

WORKSHOP MANUAL
T...102/122 - TC...102/122
Identication is simplied by the use of icons resem-
bling the various units, each of which is linked to a ta-
ble of contents that lists all related topics.
SYMBOLS
In the manual some symbols are present. They are
used to draw the attention of the operator, reminding
him to perform the interventions with the necessary
attention and caution.
Indicates operations that should be carried out
with utmost care to avoid impairing the function-
ality and safety of the machine.
Indicates operations that should be carried out
with utmost care to avoid injury to operators.
Highlights all those operations that require dier-
ent working methods depending on the type of
machine, subsequent modications and the ac-
cessories tted.
Indicates cross-reference to other parts of the
manual, followed by the number of the relevant
chapter, paragraph or sub-paragraph.
TERMINOLOGY AND ABBREVIATIONS
Some paragraphs are preceded by a denition that
highlights their importance:
NOTE General reference for the correct maintenance
execution and methods..
IMPORTANT Specic procedures or information
necessary to avoid damage to the machine or equip
ment.
WARNING! Non-observance will result in the
risk of injury to oneself or others.
DANGER! Non-observance will result in the risk
of serious injury or death to oneself or others.
Whenever reference is made
to a position on the machine
“front”, “back”, “left” or “right”
side, this refers to the posi-
tions of the seated operator.
The following abbreviations are used in this manual
Dx / Sx = Right / LeftV
Min / Max = Minimum / Maximum
Chap. = Chapter
PTO = Power Take O
HST = Hydrostatic Transmission
7. Electrical system
This chapter deals with the problems and checks
con nect ed with the electrical system.
All work can be done using a tester without ha ving
to use special equipment.
The electrical diagrams can be useful to you for
understanding how the system functions and to fa
cilitate the pinpointing of any problems.
8. Technical specications
This chapter summarises all the main information
re garding the machine.
FUNCTIONAL UNITS MAP
The map is a search tool that provides instant access
to all information concerning machine operational unit
or element.
CHAPTER REVISION FROM ... PAGE
i 1 2018 2 of 2
HOW TO USE THE MANUAL
ENGINE - FUEL TANK
CUTTING DECK
BODY ELECTRICAL SYSTEM
TRANSMISSION - BRAKE - WHEELS
STEERING

Stiga TC 102 Series Specifications

General

Brand	Stiga
Model	TC 102 Series
Category	Lawn Mower
Language	English