9034, 036, 036 QS
– Remove chain sprocket cover -
see 4.1.
Take out screw (1) and remove
the inner side plate (2).
Take out screw (3) and remove
the chain catcher (4).
VA
148RA063
2
1
3
4
Reassemble in the reverse
sequence.
Troubleshooting chart - see
"Standard Repairs, Trouble-
shooting" handbook.
– Remove clutch drum/chain
sprocket - see 4.1.
Release twist lock (1) on
carburetor box cover (2) and lift
cover off vertically.
VA
148RA064
1
2
Note:
When reassembling, check
correct position of groove and
guide.
VA
148RA065
Unscrew the slotted nut (1).
– Pull boot off the spark plug.
Remove the shroud (2).
VA
148RA066
2
1
On powerheads with a
decompression valve (1), remove
the cover and unscrew the
decompression valve.
Unscrew the spark plug (2).
VA
148RA067
1
2
Push the locking strip (1)
0000 893 5903 into the cylinder
so that the words "OBEN - TOP"
face upward.
VA
148RA069
1
4.2 Replacing the
Chain Catcher
4.3 Clutch