Online version - not for reprint
72 MS 270, MS 280
Fit the air filter and make sure it is
correctly seated (arrows).
VA
146RA138
– Troubleshooting chart – see 4.5.
– Remove the filter base
– see 12.1.
– Open the tank cap to release
internal pressure.
– Close the tank cap.
Use a screwdriver to press the
throttle shaft down and
disconnect the throttle rod.
VA
146RA135
Pull the hose (1) off the
carburetor.
– Remove the carburetor.
VA
146RA136
1
Before fitting the carburetor,
check that the sleeve (1) and
washer (2) are in position.
Reassemble in the reverse
sequence.
VA
146RA031
2
1
12.2 Carburetor
12.2.1 Removing and Installing