6-16 POWER UNIT
Tensioner adjuster
Inspect tensioner adjuster for smooth operation.
Inspect oil passage for clog.
Replace or clean if necessary.
Timing chain tensioner / chain guide
Inspect oil shoe for wear or other damage.
Replace if necessary.
Timing chain sprocket
Inspect teeth of sprocket for wear or other damage.
Replace if necessary.
INSPECTION
NOTE:
If cracks, excessive wear, defective or other damage is found
on any component, replaced component.
Timing chain
Inspect timing chain for wear or other damage.
Replace if necessary.
1. Latch
2. Tooth surface
3. Oil passage
Drive / driven gear and bearing
Inspect drive gear and driven gear for wear or other damage.
Replace if necessary.
Inspect driven gear bearing for pitting, rough or other damage.
Replace if necessary.