MID UNIT 7-15
INSPECTION
NOTE:
If excessive ware, cracks, defective or damage is found on any
component, replace component.
BUSHINGS
Inspect all bushings for excessive wear or other damage.
Replace if necessary.
If bushing fit is loose when installing, replace bushing.
OIL SEAL
Inspect swivel bracket seal for cuts, nicks, excessive wear or
other damage.
CLAMP BRACKET SHAFT
Inspect clamp bracket shaft for bend, twist or other damage.
Replace if necessary.
BRACKET
Inspect clamp brackets, steering bracket and swivel bracket for
excessive wear, cracks or other damage.
Replace if necessary.
To Next Page
Loading...
Need help?
General
