Suzuki DR 125 User Manual

PERIODIC MAINTENANCE 2-19
EXHAUST PIPE BOLTS AND MUFFLER
MOUNTING BOLT
Cylinder head nuts, when they are not tightened to the specified
torque, may result in leakage of the compressed mixture and
reduce output.
• Tighten the exhaust pipe bolts and muffler mounting bolt to
the specified torque.
& Exhaust pipe bolt
1: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler connection bolt
2:23 N·m (2.3 kgf-m, 16.5 lb-ft)
Muffler mounting nut and bolt
3, 4:
23 N·m (2.3 kgf-m, 16.5 lb-ft)
FRONT FORK
Inspect the front forks for oil leakage, scoring, or scratches on
the outer surface of the inner tubes. If any damages are found,
replace the front fork with a new one.
REAR SUSPENSION
Inspect the rear shock absorber for oil leakage and damage. If
any damages are found, replace the rear shock absorber with a
new one.
Tighten initially at 1 month and every 6 months there-
after.

Suzuki DR 125 Specifications

General

Displacement	124cc
Compression Ratio	9.5:1
Transmission	5-speed constant mesh
Bore x Stroke	57.0 mm x 48.8 mm
Ignition	CDI
Front Suspension	Telescopic, oil damped
Rear Suspension	coil spring, oil damped
Front Brake	Disc brake
Rear Brake	Drum
Ground Clearance	265 mm