138
Coolant Draining
1) Remove radiator cap.
2)Loosen drain plug (1) on radiator to drain coolant.
Removal of Radiator Hoses
1) Drain cooling system
2) To remove the hoses, loosen the screw on each hose
clamp and pull hose end off.
Alternator Belt
1) Loosen alternator drive belt tension
2) Remove alternator belt
Radiator Removal
1) Drain cooling system.
2) Disconnect engine cooling fan motor lead wire at cou-
pler.
3) Disconnect radiator outlet hose from radiator.
4) Disconnect radiator inlet hose from radiator.
5) Remove radiator shroud securing bolts.
6) Remove cooling fan/motor and radiator shroud.
7) Remove radiator.
Thermostat Removal
1) Drain cooling system.
2) Disconnect thermostat cap from intake manifold.
3) Remove thermostat.
1. Intake manifold
2. Thermostat cap
3. Thermostat
4. Spacer
5. Gasket
1
2
3
4
5
Water Pump Removal
1) Drain cooling system Refer to “Coolant Draining” on
previous page.
2) Disconnect negative battery cable from battery termi-
nal.
3) Loosen water pump drive belt tension. Then remove
water pump pulley and pump drive belt.
4) Remove crankshaft pulley.
5) Remove timing belt outside cover.