3-33
OPERATING YOUR VEHICLE
80SS5-01E
1) Be sure the parking brake is firmly
applied.
2) If the engine is running, stop the
engine.
3) Make sure the key is in “ON” or “ACC”
position, or the ignition mode is ON or
ACC.
4) With the release button (1) pushed,
push the knob button (2) and shift the
gearshift lever to the desired position.
This procedure is for emergency use only.
If repeated use of this procedure is neces-
sary, or the procedure does not work as
described, take your vehicle to an autho-
rized SUZUKI dealer for repair.
Gearshift indicator
(if equipped)
80SS03010
In the following cases, the gearshift indica-
tor is indicated in the information display
when the ignition switch is in “ON” position
or the ignition mode is ON.
• For automatic transmission, when using
the manual mode.
• For manual transmission vehicle, when
the gearshift lever is in a position other
than “N” (Neutral).
• For CVT vehicle, when using the manual
mode.
• For cruise control, when the system is
not in use.
The electronic control system monitors
driving condition (such as vehicle speed
and/or engine revolution), and it shows
which gear position is optimal for your driv-
ing with the indication on the display.
Automatic transmission vehicle
(when using the manual mode)
If UP arrow is indicated in the display while
driving, we recommend you to shift up the
gear until the arrow disappears. It is the opti-
mal gear position for a driving condition that
reduces the over revolution and stress to the
engine, and improves fuel consumption.
Manual transmission vehicle
If UP/DOWN arrow is indicated in the dis-
play while driving, we recommend you to
shift up or down the gear. It is the optimal
gear position for a driving condition that
reduces the over revolution and stress to
the engine, and improves fuel consump-
tion.
CVT vehicle (when using the manual
mode)
If UP arrow is indicated in the display while
driving, we recommend you to shift up the
gear until the arrow disappears. It is the opti-
mal gear position for a driving condition that
reduces the over revolution and stress to the
engine, and improves fuel consumption.
For details on how to use the transmission,
refer to “Using the transmission” in this sec-
tion.